Professor, Department of Mechanical Engineering
Jadavpur University, Kolkata-700032, W.B., India
PH:9883088250
Fax:
Web Address: http://jaduniv.edu.in/profile.php?uid=762

Degree	Year	University
Ph.D. 2011 Jadavpur University M.E. 2004 Bengal Engineering & science University, Shibpur B.E. 2002 North Bengal University

Name Of The Institution Position Held Period Jadavpur University Associate Professor 2018, February to Till Date Jadavpur University Assistant Professor 2010, September to 2018, February Jadavpur University Senior Lecturer 2010 February to 2010 September Jadavpur University Lecturer 2007 January to 2010 February Future Institute of Engineering & Management Lecturer 2005 February to 2007 January More

Machine Dedign, Composite and Ceramic Materials, Microfluidics, Product Development

1. Machine Design 2. Application of Machine Design 3. Kinematics of Machine 4. Basics of Mechanism 5. Basic, Advanced Engineering and Machine Drawing 6. CAD 7. Advance Kinematics and Robotics 8. Advanced Design of Mechanism 9. Plastics and Fibre Reinforced Composite 10 Design Methodology for Fracture Fatigue and Creep

Microfluidics: transport and separation of magnetic micro- particles for MEMS and biomedical applications, Kinetic of magnetic beads binding, MEMS-based biosensor. Composite Materials: Fibre reinforced laminated and rubber composite fabrication, characteristic of mechanical & tribological properties. synthesis and characterization of nano-ceramics and nano-composites. New Product Development: New Product development performance using the Structural Equation Modeling (SEM) approach, the relationship among critical success factors and success measure for organizational success and survival.

Teaching Experience Since 2004 to continue.

Title of the paper Conference Year Role Vol Number-Page Name Tribological behaviour of MgO doped alumina ceramics in dry sliding Symposium on Failure and Preventive Maintenance of Machineries 2022 Partha Haldar, Tapas kumar Bhattacharya, and Nipu Modak. - Reciprocating Frictional Behaviour of Nano Crystalline MgO based Alumina Ceramics International Conference on Advancements in Mechanical Engineering (ICAME 2020) 2020 Partha Haldar, Tapas kumar Bhattacharya, and Nipu Modak Paper ID: ICAME-00046- Potential of Pumped Hydro Storage as an Electrical Energy Storage in India International Conference on Energy and Sustainable Development; Jointly organized by Jadavpur University and IEI 2020 Partha Haldar, Nipu Modak Paper ID: ICESD2020_001- Friction Coefficient Analysis of Nano-Crystalline Copper Oxide added Alumina Ceramics National Conference on The Emerging Trends in Automotive Engineering 2020 (NCETAE 2020) 2020 Partha Haldar, Tapas kumar Bhattacharya, and Nipu Modak Paper ID: AE 03- Green synthesis of TiO2 nanopartocle by leaf extract and photocatalytic activity under sun light ICESD 2020 International Conference on Energy and Sustainable Development Jadavpur University 2020 Chirantan Mukherjee Dr. Mahua Ghosh Chaudhuri Dr. Nipu Modak Paper No. IC ESD2020-145-489-491 More

Title of the paper Journal of publication Year Role Vol Number-Page Name Tribological Behaviour of Alumina Ceramics with Nano TiO2 as a sintering aid in Non-Conformal Contact Journal of Tribology, ASME, SCIE, IF: 2.045 2021 Partha Haldar, Tapas Kumar Bhattacharya, Nipu Modak 144(6) 061703 [DOI: 10.1115/1.4053128]- Innovative approach to evaluate the wearing of nano TiO2 doped alumina ceramics in the light of image modelling Journal of Tribology, ASME, SCIE, IF: 2.045 2021 Partha Haldar, Alok Mukherjee, Tapas Kumar Bhattacharya, Nipu Modak 144(5) ID: 054501 [DOI: 10.1115/1.4051904]- Effect of Nano CuO Addition on the Tribo-Mechanical Behavior of Alumina Ceramics in Non-Conformal Contact International Journal of Applied Ceramic Technology, SCIE, The American ceramic society, IF: 1.762 2021 Partha Haldar, Tapas Kumar Bhattacharya, Nipu Modak 18(1) [DOI: 10.1111/ijac.13620]-110-118 Effect of nano-crystalline TiO2 addition on reciprocating frictional behaviour of alumina ceramics IOP Conference Series: Materials Science and Engineering, Scopus, IOP Publishing Ltd 2020 Partha Haldar, Tapas Kumar Bhattacharya, Nipu Modak 653(1), 012010/ 10.1088/1757-899X/653/1/012010- Influence of operating parameters in particle spreading, separation and capturing in a hybrid free flow magnetophoretic bio-separator Physics of Fluids, SCIE, American Institute of Physics 2020 Abhishek Samanta, Nipu Modak Vol 32, 112012- More

Book Title Publisher Name Year Role Testing and Characterization of Fiber Reinforced Epoxy and Polymer Composite by Soumyabrata Chakravarty, Partha Haldar, Nipu Modak Elsevier - Encyclopedia of Materials: Plastics and Polymers [DOI: 10.1016/B978-0-12-820352-1.00207-8] 2022 Potential of Pumped Hydro Storage as an Electrical Energy Storage in India by Partha Haldar and Nipu Modak International Conference on Energy and Sustainable Development, ICESD 2020 2020 Green synthesis of TiO2 nanopartocle by leaf extract and photocatalytic activity under sun light by Chirantan Mukherjee, Mahua Ghosh Chaudhuri & Nipu Modak International Conference on Energy and Sustainable Development, ICESD 2020 2020 Role of Product Development Process for NPD Success in Indian Manufacturing Industries: Quality, Cost and Technological Aspects by Sudeshna Roy, Nipu Modak & Pranab K Dan Advances in Simulation, Product Design and Development; Proceedings of AIMTDR 2018, Springer, Singapore, doi.org/10.1007/978-981-32-9487-5 2020 Impact of Collaborative Drivers of NPD on Quality Cost and Customer Satisfaction by Sudeshna Roy, Nipu Modak & Pranab K Dan Advances in Materials and Manufacturing Engineering, Proceedings of ICAMME 2019, Springer, Singapore, doi.org/10.1007/978-981-15-1307-7 2020 More

Awarded By Award Name Year 6th International Conference on Solid Waste Management IconSWM 2016 Excellent Paper Award 2016 19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference VMK Sastry Best Poster Award 2008

Name Of The Scholar Title Of The Thesis Co-Superviser Status Year Abhishek Samanta Magnetic Bead Based Immunomagnetic Separation for Lab-on-a-Chip Devices Prof. Ranjan Ganguly, Prof. Amitava Datta Complete 2019 Sudeshna Roy Developing a framework for Engineering Product Development in Indian Context Dr. Pranab K. Dan Complete 2019 Dharmendra Madhukar Synthesis and Characterization of Aluminium and TIC Particle Filled Fibre Reinforced Epoxy Composite Development and Deformation Evaluation of mg2si Reinforced Magnesium Matrix Composite Ongoing 2019 Bikash Chandra Bhunia Development and Deformation Evaluation of mg2si Reinforced Magnesium Matrix Composite Ongoing 2019 Chirantan Mukherjee Synthesis, Characterization and Property Evolution of Resin Nanoparticles Composite for Different Application Ongoing 2018 More

Name Of The Scholar Title Of The Thesis Co-Superviser Year Bhaskar Guin Trajectory Planning for a Six-Lagged Walking Robort and its Experimental Validation Prof Tarun K Naskar 2019 Jayanta Sarkar PREPARATION AND TRIBOLOGICAL CHARACTERIZATION OF Ni-P COATED GLASS FIBER REINFORCED EPOXY COMPOSITES Prof. Pasanta Sahoo 2016 Ankur Saha FABRICATION AND TESTING OF PARTICLE DOPING FIBRE REINFORCED COMPOSITE BRAKE DISC Dr. P C Roy 2016 Partha Haldar STUDY OF MECHANICAL PROPERTIES OF NATURAL FIBER REINFORCED COMPOSITES Prof. Goutam Sutradhar 2015 Mainak Sen Investigation of tribological properties of woven E-glass fibre reinforced epoxy composite P Sahoo 2013 More

Project Title Worked As Funding Agency Amount Duration Period Status Fabrication and development of mg2si reinforced magnesium metal matrix composite Principal Investigator RUSA 6.0 Lakh 1 years + Extended 2019 to  Ongoing Experimental Investigations of Tribological and Mechanical Properties of Fibre Reinforced Composites Principal Investigator UGC 12.75 Lakh 4 Years April, 2013 to March, 2017 Complete

Title Organised By Venue Year CFD Applications for Transport and Separation of Magnetic Microspheres in Microfluidic Devices. UGC Sponsored Refreshers Course: " Recent Advances and Trends in CFDin Engineering". Department of Mechanical Engg., Jadavpur University 2012

Title Indian Society For Heat And Mass Transfer

Program Name Organised By Venue Year International Conference on Energy and Sustainable Development 2020 (ICESD 2020) Mech Engg Dept, JU and The Institution of Engineers, Organizing Member Mech Engg. Dept. Jadavpur University 2020 National Conference on The Emerging Trands in Automotive Engineering 2020 (NCETAE2020) School of Automotive Engg, JU, Organizing Member Mech Engg. Dept. Jadavpur University 2020 Winter School Refresher Course Programme: Inte-disciplinary Refresher Course on Emerging Trends in Mechanical Engineering with Inter-Disciplinary Application Ju, Mech Engg Dept, as Programme Coordinator Mech Engg. Dept. Jadavpur University 2019 8th ICONSWM 2018 International Conference JU and KIT as Assistant Secretary KIT, Bhubeneswar 2018 One day National Workshop on Recent Trends in Pressure Vessels Design and Operation on 29th March 2017 Ju, Mech Dept, as Coordinator Mech Engg. Dept. Jadavpur University 2017 More

Program Name Organised By Venue Year Type Of Participation 5th International Conference on Emerging Trands Multidisciplinary Research NUS & AIRF National University of Singapore 2019 Presented The 6th International Conference on Solid Waste Management Jadavpur University Jadavpur University 2016 Participant 11 th International Conference on the Scientific and Clinical Applications of Magnetic Carriers University of British Columbia University of British Columbia, Vancouver, Canada 2016 Presented Workshop on Recent Advances and Developments in Energy Sectors ME Dept, Jadavpur University ME Dept, Jadavpur University 2016 Participant Workshop on Solidification and Phase Transformation ME Dept, Jadavpur University ME Dept, Jadavpur University 2016 Participant More

Program Name Session Title Organised By Venue Year 5th International Conference on Emerging Trands Multidisciplinary Research National University of Singapore, Singapore 2019 6th International Conference on Solid Waste Management (IconSWM 2016) Jadavpur University in Kolkata 2016 Back To Top