Professor, Department of Production Engineering
PH:03324572856
Fax:03324146153
Web Address:

Degree	Year	University
Ph.D. 1995 JU

Name Of The Institution Position Held Period Jadavpur University Associate Professor 21.06.2008 to Till date Jadavpur University Reader 21.06.2005 to 20.06.2008 Jadavpur University Senior Lecturer 06.03.2004 to 20.06.2005 Jadavpur University Lecturer 06.03.1999 to 05.03.2004

Name Of Organization Postition Held Period West Bengal Power Development Corporation (WBPDCL) Assistant Manager (Power Station) 20.09.1996 to 05.03.1999

Production Technology, Advanced Machining Processes

THEORETICAL: Odd Semester: 1. Automation of Production Systems (M. Prod. E. 1st Year) 2. Deformation of Solids (B. Prod. E. 2nd Year) Even Semester: 1. Advanced Material Forming, Tools and Die Design (M. Prod. E. 1st Year) 2. Material Forming (B. Prod. E. 3rd Year) SESSIONAL: Odd Semester: 1. Manufacturing System Lab-II (B. Prod. E. 2nd Year) 2. Manufacturing System Lab-IV (B. Prod. E. 3rd Year) 3. Automation, CNC & Robotics Lab (B. Prod. E. 4th Year) 4. PG Laboratory (M. Prod. E. 1st Year) Even Semester: 1. Project & Thesis (B. Prod. E. 4th Year) 2. Basic Engg Lab (B. Prod. E. 1st Year) 3. Manufacturing System Lab-III (B. Prod. E. 2nd Year) 4. Term Paper Leading to Thesis (M. Prod. E. 1st Year)

Electro-discharge Machining (EDM), Wire Electro-discharge Machining (WEDM), Electro-chemical Grinding (ECG), Electro-chemical Deburring (ECD), Electrolytic In-Process Dressing (ELID) Grinding, Laser micro-machining, Optimization techniques.

Teaching & Research: Since 1999 Industrial: 1996-1999

Title of the paper Conference Year Role Vol Number-Page Name Braking: The Most Strenuous Task of Locomotive Driving HWWE 2021 International Conference, IIT-Guwahati 2021 Subir Danda, Soumya Sarkar, Bikash Bepari, Kalyanbrata Saha, Balendra Nath Lahiri -65 Working Posture Evaluation of Bus Drivers - using CMDQ and RULA Technique HWWE 2021 International Conference, IIT-Guwahati 2021 Soumyajit Das, Sujit Patra, Subir Danda, Bivash Mallick, Avishek Pandey -83 Evaluation of Driving Postures of Electric Loco Goods Pilots using Muscle Fatigue Assessment in WAG7 Locomotives HWWE 2019 International Conference, NIT-Jalandhar 2019 Subir Danda, Soumya Sarkar, Bikash Bepari, Kalyanbrata Saha, Balendra Nath Lahiri -152-154 Assessment of Driving Seat of WAG7 Locomotives of Indian Railways using Howerth and Cornell Ergonomic Seating Evaluation Method HWWE 2019 International Conference, NIT-Jalandhar 2019 Subir Danda, Soumya Sarkar, Bikash Bepari, Kalyanbrata Saha, Balendra Nath Lahiri -160-162

Title of the paper Journal of publication Year Role Vol Number-Page Name Honking: Is It a Pleasant Task J. Indian Railways 2021 Subir Danda, Soumya Sarkar, Bikash Bepari, Kalyanbrata Saha, Balendra Nath Lahiri Vol. 65, No. 3 & 5-70-72 & 63-65 Postural evaluation of notching action in WAG7 railway goods-locos (indicates correction necessities) Int. J. Forensic Engineering & Management 2020 Subir Danda, Soumya Sarkar, Bikash Bepari, Kalyanbrata Saha, Balendra Nath Lahiri Vol. 1, No. 1-90-102 Experimental Investigation and Multi-objective Optimization of Wire Electrical Discharge Machining (WEDM) of Aluminum-5083 Alloy Transactions of Nonferrous Metals Society of China, Elsevier 2014 Co-Author 24-373-379 Multi-Response Optimization of WEDM Parameters on Aluminum 5083 Alloy Using Taguchi Based Grey Analysis Journal of Machining and Forming Technologies 2013 Co-Author 5/1-2-89-96 Investigations on Influence of Process Variables on Crater Dimensions in Micro- EDM of γ -Titanium Aluminide Alloy in Dry and Oil Dielectric Media International Journal of Advanced Manufacturing Technology 2013 Co-Author Vol.-65-pp. 1009-1017 More

Name Of The Scholar Title Of The Thesis Co-Superviser Status Year Sri Sibsundar Das Investigation on magnetic Field Assisted Electrochemical Deburring(ECD) Dr. S. Mitra Ongoing 2012 Sri G. Selvakumar Analysis and Optimization of Die Corner Accuracy in Wire Electrical Discharge machining (WEDM) Dr. S. Mitra Complete 2010 Sri Mukunder Sekh Measurement and Analysis of Wire Lag for High Precision Profile Generation in Wire Electrical Discharge Machining (WEDM) Dr. B. Bhattacharyya & Dr. S. Mitra Complete 2007 Sri Goutam Paul Experimental Investigation and Analysis of Electro Discharge Machining (EDM) for High Precision Applications Dr. S. Mitra Ongoing 2007 Sri Manoj Singha Investigation on Multi-Parametric Mixes of Electrochemical Deburring (ECD) Process for Enhanced Deburring Characteristics Dr. S. Mitra & Dr. A. S. Kuar Complete 2007

Name Of The Scholar Title Of The Thesis Co-Superviser Year K. Tarkeswar Parametric Analysis and Optimization of Pulsed Nd:YAG Laser Micro-drilling of Gamma Titanium Aluminide Dr. A.S. Kuar 2014 Kunal Mishra An Experimental Study amd Parametric Optimization of Ultrasonic Drilling on Silicon Nitride Dr. A.S. Kuar 2014 Dhrubajyoti Chakraborty Development of wire path modification strategy for enhanced corner accuracy in WEDM Dr. S. Mitra 2013 Susmita Dutta Experimental investigation and modeling of corner profile geometry in wire electrical discharge machining Mr. S.K. Debnath 2012 Abhijit Biswas Design and Development of Cylindrical Wire Electrical Discharge Turning Setup Prof B. Bhattacharyya 2011 More

Project Title Worked As Funding Agency Amount Duration Period Status Study On Electro Discharge Machining Of Advanced Engineering Ceramics Co-Investigator CSIR 18.5 Lakh 3 Years 10.05.10 to 10.05.13 Complete Development Of Intelligent Electrochemical Deburring (ECD) System For Enhanced Finishing Charecteristics Of Advanced Engineering Materials Co-Investigator AICTE 16.5 Lakh 2 years 30.10.08 to 30.10.10 Complete Analysis of the Optimal Parametric Combination for Enhanced Deburring Characteristics in Electro-Chemical Deburring(ECD) Co-Investigator AICTE 7.5 Lakh 2 Years 23.02.01 to 23.02.03 Complete

Title Member of Institution of Engineers (I) Life member of Indian Society of Technical Education (ISTE), New Delhi

Program Name Organised By Venue Year Recent Advances in Laser Technology & its Applications UGC Academic staff college, Jadavpur university School of Laser Science & engineering, JU 2013 UGC sponsored:Recent Advances in Energy Engineering and Environment Management Academic Staff College, Jadavpur University Mechanical Engg Dept 2011 UGC Sponsored:Recent Development in Nanoscience & Technology Academic Staff College, Jadavpur University Metallurgical Engg Dept 2010 UGC sponsored refresher course:Advanced Quantitative Techniques for Production Management Academic Staff College, Jadavpur University Production Engg Dept, 2002 UGC sponsored refresher course:Advances In Engineering Materials Academic Staff College, Jadavpur University Metallurgical Engg Dept 2001 More

Program Name Organised By Venue Year Type Of Participation Recent Advances in Manufacturing Technology & Management Jadavpur University, Production Engg Dept Production Engg Dept 2010 Organizer Workshop on Application of Laser in Mechanical Engineering (WALME - 2004) School of Laser Science and Engineering, Jadavpur University School of Laser Science and Engineering 2004 Resource Person National Conference on Advances on Manufacturing Systems AMS-03 Jadavpur University Production Engg Dept 2003 Participant

Program Name Session Title Organised By Venue Year National Conference on Advances in Manufacturing Systems Technical session-Manufacturing technology Jadavpur University Production Engg Dept 2003 Back To Top

1.Regular reviewer of several reputed international journals. Received special appreciation from Editors-in-Chief of the famous international research Journal (Journal of Material Processing Technology) for high quality review. 2.Undertaken collaborative industrial work, which involves very high precision narrow slit generation perpendicular to the axis of a hollow stainless steel pipe by wire electrical discharge machining (WEDM). 3.One research publication in the Journal of Material Processing Technology was considered as major R & D breakthrough by Technical Insights (TI) Division of Frost & Sullivan (New York), a leading world-class market consultant. 4.Member of Administrative Committee and Advisory Committee of UGC, Centre of Advanced Studies (CAS) Program of the Department of Production Engineering. 5.Member of Swami Vivekanada Centre for Technical Manpower Development (SVCTMD) and also acted as Course Director and resource person in courses organized by SVCTMD. 6.Acted as an external Technical Expert for technical recommendation for the purchase of Software to be used in 5-Axis CNC Universal Milling Machine, at Central Mechanical Engineering Research Institute (CMERI), Durgapur. 7.Member of committee for overall supervision of Central Computer Aided Analysis and design (CAAD) Laboratory of the University 8.Nominated by the University to function as Liaison Officer for 5th Joint Review Mission of the World Bank and the Govt of India in connection with Technical Education Quality Improvement Program (TEQIP) held on 5th & 6th June 2006.